TOLERANCE TABLE

TOLERANCE TABLE

Tolerances for sponge rubber acc to ISO 3302-1

nominal dimension

(mm)

 Tolerance class E1 Tolerance class E2 Tolerance class E3
Tolerances -in mm Tolerances -in mm Tolerances -in mm
0 - 1.5
 0.15 0.25 0.40
> 1.5 -2.5
 0.20 0.35 0.50
> 2.5 -4.0
 0.25 0.40 0.70
> 4.0 - 6.3
 0.35 0.50 0.80
> 6.3 -10.0
 0.40 0.70 1.00
> 10.0 -16.0
 0.50 0.80 1.30
>16.0 -25.0
 0.70 1.00 1.60
>25.0 -40.0
 0.80 1.30 2.00
>40.0-63.0
 By agreement 1.30 2.50
>63.0 100.0
 By agreement 2.00 3.20
Tolerances for profiles and hoses (without reinforcement) -rubber acc to ISO 3302-1

nominal dimension

(mm)

 Tolerance class E1 Tolerance class E2 Tolerance class E3
Tolerances -in mm Tolerances -in mm: Tolerances -in mm
0 - 1.5
 0.15 0.25 0.40
> 1.5 -2.5
 0.20 0.35 0.50
> 2.5 -4.0
 0.25 0.40 0.70
> 4.0 - 6.3
 0.35 0.50 0.80
> 6.3 -10.0
 0.40 0.70 1.00
> 10.0 -16.0
 0.50 0.80 1.30
>16.0 -25.0
 0.70 1.00 1.60
>25.0 -40.0
 0.80 1.30 2.00
>40.0-63.0
 By agreement 1.30 2.50
>63.0 100.0
 By agreement 2.00 3.20
Tolerances for cut-to-length extrusions acc to ISO 3302-1

nominal dimension

(mm)

 Tolerance class L1 Tolerance class L2 Tolerance class L3
Tolerances -in mm Tolerances -in mm: Tolerances -in mm
0 - 40
 0.15 0.25 0.40
> 40 -63
 0.20 0.35 0.50
>63-100
 0.25 0.40 0.70
>100-160
 0.35 0.50 0.80
>160-250
 0.40 0.70 1.00
>250-400
 0.50 0.80 1.30
>400-630
 0.70 1.00 1.60
>630-1000
 0.80 1.30 2.00
>1000-1600
 By agreement 1.30 2.50
>1600-2500
 By agreement 2.00 3.20
  Tolerances -in mm Tolerances -in mm Tolerances -in mm
>4000
 0.16 0.32 0.50

All tech data presented without guarantee -no liability for correctness, actuality and completeness